Thumbnail of user mf65

M F.

Contributor Level

Total Points
82

1 Review by M

  • MakerGeeks

2/18/17

I run a Makerspace at a community college and work with 3D printers on a regular basis. I know good filament when I see it, and I use Maker Geeks filament with my own personal machine. Prints come out very strong (it is a tough, higher temperature PLA, not brittle like so many others. A small piece of filament fatigues when bent, rather than snapping or cracking). The filament captures fine detail well. Layer adhesion is great, and the filament diameter tolerance is consistent. It is an affordable PLA with results comparable to very expensive, high-end filaments. I order the 1.75 mm PLA, in regular Maker Geeks colors, as well as their recycled PLA, and have been very pleased with all of them. Packaging is good, with silica gel packets in resealable bags which work well for dry storage. Labeled with proper print temperatures.
Also, the customer service is good. I have emailed with questions, and received prompt, helpful responses from the owner.
This is a good company, and I recommend this filament to fellow makers.

M Has Earned 2 Votes

M F.'s review of MakerGeeks earned a Funny vote

M F.'s review of MakerGeeks earned a Very Helpful vote

M hasn’t received any thanks yous.

M doesn’t have any fans yet.

M isn’t following anybody yet.

Empty.

Similar Reviewers on Sitejabber

Thumbnail of user johnd2267
2/27/19

Their filament is great. Pla, petg, raptor, all worked with no problems in my printers. I have...

Thumbnail of user carltons31
1/28/19

Out the gate so far, Since June 2018 I've only ever ordered grab bag rolls I've never had any...